Mathews Triax is a new compound bow design from Mathews in 2018 that takes the traditional crossbow design and incorporates a tri-axel system. This system allows for more accuracy and power when firing, making it an excellent choice for hunting big game.
The Triax features a sleek design with an aggressive camo finish, making it perfect for stalking and taking down games in any condition.
However, like other bows, it has some common issues. People must want to know what the Mathews Triax problems are. The noise in the Upper Limb Pocket and bad cam issues are the common problems.
I’m going to share the solutions to the problems in this article. Keep reading to find more!
Table of Contents
- List of all the Mathews Triax problems and Solutions
- Mathews Triax draw weight adjustment
List of all the Mathews Triax problems and Solutions
Mathews Triax bowhunting has always been known for its great gear and technology, but there have been some recent issues with the Triax bows. Here is a list of all the Triax bow problems and their solutions.
There have been some Mathews Triax bow problems reported. Some of the more common issues are:
#1. Cracking sound in upper limb pocket
This problem is related to the bow’s upper limb pocket. It’s the noise that occurs during the activity itself.
It’s a tiny sound that is very similar to the faltering noise. But you’ll only hear it before you pull back your bow completely. It’s slightly similar to the creaking sound only once per bow preparation.
Pull it several times without firing to hear a small reminder to use the perfect arrow puller. You might hear the creaking sound as you fire your first shot, and usually, you will hear it each time you fire a shot.
It is common for this problem to affect archers of almost any bow. I will be sharing all of the practical solutions for this problem now.
If these experts offer your help, they’ll surely do it. Instead, they led you through this procedure to make a provision of it for your problem. They created the solution, so try this result first.
To loosen the limb bustle bolt:
- Tighten the bolt again after removing it a few turns.
- Be careful not to tighten the bolt tightly. The noise should cease now.
- If the noise persists, do this second solution suggested by Mathews.
A bolt is situated right under the limb pocket and must be loosened now.
Another great solution is to use White Lithium Grease on your bow here. Unstring the bow first, then use the grease in areas with contact.
Avoid applying a thick layer of grease to places with no contacts. Apply a light coating in those places, and in this way, the grease will be spread throughout the locations where this cover touches.
A pivot point is held using a bolt on the rocker to the riser. Often, that bolt will come loose, making noises. So, try tightening that up.
#2. Imperfect Cam Bearing unsuitable for operation
Mathews has had issues with its cam for quite a while. So, if your bow typically has problems with its cam, it’s not that rare.
If you see grease coming out of a cam bearing, it’s likely broken. Don’t ignore a loose nut when it comes to bows.
It’s as simple as changing your cam. Do not create it too tight as it can wreck consequences. If you can’t fix it, you must change your current cam-bearing. You should call Mathews for it. If they do not provide one, you have to be able to buy one at any bow store.
Besides the above solutions, Bow care is essential to shooting and archery. Proper care will keep your bow in good condition and increase its lifespan. Here are some tips for appropriate bow care:
- Clean your bow every time you shoot it. This includes removing all residue, oil, and dust.
- Store your bow in a dry place. A humid environment can cause wood to swell and damage the bow’s construction.
- Do not clean your bow with harsh chemicals, such as those in cleansers.
Mathews Triax draw weight adjustment
Mathews Triax draw weight adjustment allows shooters to customize the pull weight of their bow for increased accuracy. This simple adjustment can be made by loosening or tightening the screw on the cable guard.
Adjustments might be made using a 3/16″ Allen wrench or a 7/32″ socket wrench. The bolt rotates clockwise to reduce the draw weight and counterclockwise to increase the drawing weight. The limb bolt should fit snugly.
So, I strongly recommend getting an Allen wrench before you proceed.
And how to change the draw length on Mathews Triax? Mathews Triax draw length can be adjusted from 24.5″ to 30.5″. This makes it one of the market’s most versatile bow draw lengths. Changing the draw length using the supplied Allen wrench on your Mathews Triax can make a big difference in how the bow feels. Here’s how to do it.
Once you’ve adjusted the draw length, please take note of the new setting and ensure it’s properly aligned with your archer’s hands and body.